本文へスキップ

株式会社日本医化器械製作所は環境制御技術を専門とする医療機器・科学機器の専門メーカーです

E-mail  nk.trade@nihonika.co.jp

3-9, Tamatsukuri Motomachi, Tennoji-ku, Osaka 543-0014, Japan

Low temperature incubator 

Low temperature incubator LP-50P LP130P LP-200P LP260P LP400P

These low temperature incubators are capable of 4 step-program control with a high accuracy microprocessor (cooler: on-off control, heater: proportional control). Stainless steel shelves are coated with anti-bacterial resin to prevent bacterial contamination inside the chamber. A wide variety of chambers are available in size ranging from 50 liters to 400 liters.

         
 model LP-50P  model LP-130P  model LP-200P  model LP-260P  model LP-400P



Operation Panel


■Features

  • Four step-program control operation
  • Automatic alarms controlled by a microprocessor, a buzzer alarm as well as an alarm display on the operational panel (buzzer alarm is optional in model LP-50P).
  • Prompt cooling to -15oC.
  • Easy-to-use operational panel with digital display
  • Cooler: on-off control, heater: proportional control
  • Shelves and measurement opening are coated with anti-bacterial resin to prevent bacterial contamination.
  • Option: illuminating lamp.


■Temperature precision in the chamber
Temperature setting 5.0℃ 10.0℃ 25.0℃
Highest temperature 6.2℃ 11.0℃ 25.3℃
Lowest temperature 2.0℃ 6.4℃ 22.3℃
Average temperature 4.8℃ 9.5℃ 24.7℃
Deviation from the set value -0.2℃ -0.5℃ -0.3℃
# Temperature precision data are available in our technical data sheets other than the brochure.


■Applications

  • Plant tissue culture, germination tests
  • Breeding of Insects or small animals
  • Culture of microorganisms, such as bacteria, viruses, and fungi
  • BOD-testing for water quality and storage of test samples
  • Biochemical experiments at low temperature, such as electrophoresis
  • Quality testing of pharmaceuticals, cosmetics or foods, etc.


■Specifications

Model LP-50P LP-130P LP-200P
Outer dimensions (mm) W483×D553×H690 W704×D569×H1063 W704×D800×H1,063
Inner dimensions (mm) W400×D335×H370 W620×D340×H584 W620×D545×H584
Control system Controlled by microprocessors with digital display, forced air circulation system
Temperature range -15~50℃(environ temperature of 20oC without loading)
Light source Fluorescent lamp 15W
Freezer 85W 175W 180W
Power requirement Single phase 100V 
10A
50/60Hz 10A
Single phase 100V 50/60Hz 15A

Model LP-260P LP-400P
Outer dimensions (mm) W704×D569×H1,633 W704×D800×H1,633
Inner dimensions (mm) W620×D340×H1,154 W620×D545×H1,155
Control system Controlled by microprocessors with digital display, forced air circulation system
Temperature range -15~50℃(environ temperature of 20oC without loading)
Illumination with temperature control Fluorescent lamp 15W
Freezer 300W
Power requirement Single phase 100V 50/60Hz 15A





Nippon Medical & Chemical Instruments Co., Ltd.
Copyright(C)NKsystem,All Rights Reserved