Nippon Medical & Chemical Instruments Co., Ltd. is a manufacturer specialized for environmental control technology.

Multi-chamber Animal Housing System <Bio-multi Model>

■Each of the chambers can be individually controlled for temperature and illumination.

modelLP-30LED-8CTAR

modelLP-80LED-6CTAR

■Features

• It is compact, small-footprint, and energy-saving, and can be installed anywhere.
• Temperature can be controlled between +5 and +45°C, with changeover between constant operation and day/night switching operation. Each chamber can be individually controlled for temperature.
• Innovative air jacket system provides animal-friendly and stable, constant-temperature environment.
• Animals are housed in each chamber with less strass, and there is no cross-contamination among chambers.
• Each chamber is clean. HEPA filter is attached for inlet air and deodorant filter for exhaust air.
• Light intensity and lighting time can be individually controlled for each chamber, with changeover between constant operation and day/night switching operation.
• An inner door is installed to observe animals in each chamber.
• LP-30LED-8CTAR has 8 chambers with interior dimensions of W315 × 283 × H240 mm (small size).
• LP-80LED-6CTAR has 6 chambers with interior dimensions of W390 × D500 × H260 mm (large size).

■Specifications

Model	LP-30LED-8CTAR	LP-80LED-6CTAR
Outer dimensions (mm)	W1,255×D577×H1,900	W1,555×D825×H1,985
Inner dimensions (mm)	W315×D283×H240×8 chambers	W390×D500×H260×6 chambers
Temperature	+5 to 45℃ (+15 to 45℃ when light is on)
Ventilation (air intake)	20L/min (8 chambers in total) with HEPA filter	60L/min (6 chambers in total) with HEPA filter
Ventilation (air exhaust)	20L/min (8 chambers in total) with deodorant filter	60L/min (6 chambers in total) with deodorant filter
Temperature control	Changeover between constant operation and day/night switching operation.
Illumination	LED lamp x 8 chambers Dimmable function (individually controlled), timer (individually controlled)	LED lamp x 6 chambers Dimmable function (individually controlled), timer (individually controlled)
Power requirement	Single phase 100V, 50/60Hz, 19A	Single phase 100V, 50/60Hz, 18A

* These products should be used at an ambient temperature lower than 30°C.
* Temperature in a chamber may increase beyond the set value depending on radiation heat from lamps or heat generated
by animals.
* The lowest temperature may have to be set to 15°C or higher depending on lighting or temperature setting.

このページの先頭へ