Nippon Medical & Chemical Instruments Co., Ltd. is a manufacturer specializing in environmental control, medical device, and scientific instruments.
These low temperature incubators are capable of 4 step-program control with a high accuracy microprocessor (cooler: on-off control, heater: proportional control). Stainless steel shelves are coated with anti-bacterial resin to prevent bacterial contamination inside the chamber. A wide variety of chambers are available in size ranging from 50 liters to 400 liters.
■Temperature distribution in the chamber
Temperature setting | 5.0°C | 10°C | 25°C |
---|---|---|---|
Highest temperature | 6.2°C | 11.0°C | 25.3°C |
Lowest temperature | 2.0°C | 6.4°C | 22.3°C |
Average temperature | 4.8°C | 9.5°C | 24.7°C |
Deviation from the set value |
-0.2°C | -0.5°C | -0.3°C |
Model | LP-50P | LP-130P | LP-200P |
---|---|---|---|
Outer dimensions (WxDxH) [mm] | 483×553×690 | 704×569×1063 | 704×800×1,063 |
Inner dimensions (WxDxH) [mm] | 400×335×370 | 620×340×584 | 620×545×584 |
Control system | Controlled by microprocessors with digital display, forced air circulation system | ||
Temperature range | -15~50℃(environ temperature of 20℃ without loading) | ||
Light source | ― | Fluorescent lamp 15W | |
Freezer | 85W | 175W | 180W |
Power requirement | Single phase 100V 50/60Hz 15A |
Model | LP-260P | LP-400P |
---|---|---|
Outer dimensions (WxDxH) [mm] | 704×569×1,633 | 704×800×1,633 |
Inner dimensions (WxDxH) [mm] | 620×340×1,154 | 620×545×1,155 |
Control system | Controlled by microprocessors with digital display, forced air circulation system | |
Temperature range | -15~50℃(environ temperature of 20℃ without loading) | |
Light source | Fluorescent lamp 15W | |
Freezer | 300W | |
Power requirement | Single phase 100V 50/60Hz 15A |