Products

With LED lamp

Small Plant Growth Chamber＜See-Through Model＞

This small plant growth chamber (120 liters) which can utilize natural light. This model is most suitable for the experiments using both artificial and natural light.

Features

  • This model is equipped with energy saving LED lamps with suitable spectral distribution for plant growth.
  • Easy to observe the inside, with double insulated glass and 5-sided structure. Suitable for experiments of plants or insects.
  • Three-position controller is used for temperature and humidity control, which provides energy-saving effects.
  • Air circulation system allows good temperature distribution.

Applications

  • Plant cell/tissue culture, germination, acclimation, or growth test
  • Environmental resistance test for plants
  • Insect experiment
  • Environmental test

 

Options

  • Outlet inside the chamber
  • Measurement hole

 

LED Spectrum

Specifications

 

Model Yellow LED LH-120PFD-RD
 LH-120PFP-RDCT
Pink LED LH-120PFP-RD LH-120PFP-RDCT
Outer dimensions (mm)  W635×D602×H1,519
Inner dimensions (mm)  W380×D418×H773
Control system Changeover between constant operation

Changeover between constant operation 

and day/night switching operation 
Repeat ― 1 or 99 times or unlimited
Temperature  +5℃ to 50℃ ± 1℃ (+15℃ ~ when all lights on)

Light

source

 Illumination

Straight tube LED lamp (PLANTFLEC) for plant growth
Number of lamps Lef, right, and rear: 4 lamps (20W) x 3 sides, Celling: 4 lamps (10W) x 1 side
Refrigerator 150W 
Heater 300W
Shelf 4 shelves  (adjustable)  

Operation current(maximum)

 5.5A 
Power requirement Single phase 100V 50/60Hz 15A
Weight (kg) About 90

* Temperature sensor: platinum resistance temperature sensor.

*These chambers are designed to operate in ambient temperatures up to 30℃. The specified performance may not be achieved depending on actual usage conditions.

*Depending on operating conditions, samples in the chamber may become dry.

*When lighting, temperature setting should be 15℃ or higher.

Products

RETURN TO TOP