Products

With LED lamp

Benchtop Plant Growth Chamber

Choose from Three Types of LEDs: SUNRAY LIGHT LED (White color), PLANTFLEC LED Pink color or Yellow color!

Features

【To be released on July 2025】

  • Simple light shield type.
  • LH-62PF (S/D/P) is equipped with LEDs in the ceiling.
  • LH-62PF (S/D/P) is equipped with LEDs in the ceiling and in the left, right, and rear sides.
  • The temperature is controlled within the range of +10°C to +40°C ( +15℃ ~ when all lights on). A three-position control system is utilized for energy savings.
  • The changeover operation is available between constant operation and day/night switching operation.

Applications

  • Tissue culture, germination, and growth tests for plants
  • Growing of plug vegetables, mini-gardens, and ornamental plants

Options

  • Outlet inside the chamber

Specifications

Model White LED Yellow LED Pink LED
LH-62PFS LH-62PFD LH-62PFP
Outer dimensions (㎜) W469×D460×H1,009
Inner dimensions (㎜) W395×D360×H460
Control system

Changeover between constant operation and day/night switching operation  

＊Lighting and temperature: Once per day each
 Control methods Three-position control method: Refrigerator, ON/OFF control; heater, proportional control 
Temperature +10℃ to 40℃ ± 2℃　( +15℃ ~ when all lights on)
Illuminance1 4,000 lx 3,100 lx 1,800 lx
Photon flux density1 70 μmolm-2s-1 45 μmolm-2s-1 40 μmolm-2s-1
Light
source		 Illumination

Straight tube sun-like LED lamp

(SUNRAY LIGHT) 

Straight tube LED lamp (PlantFlec)

for plant growth
Number of lamps 　Ceiling: 3 lamps (10W)
Cooler 150W
Heater 150W
Operation current (maximum) 3.5A
Power requirement Sigle phase 100V 50/60Hz 15A
Weight 60 ㎏

 

Model White LED Yellow LED Pink LED
LH-62PFS LH-62PFD LH-62PFP
Outer dimensions (㎜) W550×D503×H1,009
Inner dimensions (㎜) W395×D360×H460
Control system

Changeover between constant operation and day/night switching operation 

＊Lighting and temperature: Once per day each
 Control methods Three-position control method: Refrigerator, ON/OFF control; heater, proportional control 
Temperature +10℃ to 40℃ ± 2℃　( +15℃ ~ when all lights on)
Illuminance1 15,000 lx 11,800 lx 7,300 lx
Photon flux density1 250 μmolm-2s-1 160 μmolm-2s-1 150 μmolm-2s-1
Light
source		 Illumination

Straight tube sun-like LED lamp

(SUNRAY LIGHT) 

Straight tube LED lamp (PlantFlec)

for plant growth
Number of lamps 　Left, right, and rear: 3 lamps (15W) × 3sides, Ceiling: 3 lamps (10W)
Cooler 150W
Heater 150W
Operation current (maximum) 4A
Power requirement Sigle phase 100V 50/60Hz 15A
Weight 68 ㎏

 

1 Illuminance and photon flux are measured on the center shelf inside the cabinet.

* Safety devices: Earth leakage circuit breaker, refrigerator protection device (overload relay [automatic recovery type]), and fuse

* The cooling device uses a CFC-free natural refrigerant.

* The temperature sensor: platinum resistance thermometer

* The power supply does not include the capacity of the outlet inside the cabinet. An optional outlet inside the chamber can be used, with a maximum capacity of up to 1A.

* The unit is designed to be used in a typical indoor environment with room temperatures from 15°C to 30°C. Depending on usage conditions, the specified performance may not be achieved.

* Drainage facilities may be required depending on the sample in the chamber.

* When lighting, the temperature should be set at 20°C or higher. Leave a minimum of 30 cm of space on both sides of the chamber; otherwise, it may lead to a deterioration in the cooling function.

* Accuracy: Temperatures are those when the lighting is off.

* If you operate this chamber at high temperatures for an extended period, please get in touch with our nearest sales office.

Products

RETURN TO TOP