Temperature gradient incubator｜NIPPON MEDICAL & CHEMICAL INSTRUMENTS CO., LTD.

Products

Temperature gradient incubator

Compact design, one incubator works for 3 to 5 incubators!
WLED are used to save the space, energy, and cost, as well as to speed up the research & development.

Features

Compact design to save space.
Changeover system between constant operation and day/night switching operation.
Temperature can be separately controlled at each shelf, ranging from +5℃ to 50℃ (During lighting: from +10℃ to 40℃).
Each shelf is installed with WLED.
Illumination of each shelf can be on/off controlled by using a touch panel. Illuminance can be manually controlled at each shelf.
Even illumination with close illumination.
<Option> power-outlet installed in the incubator.

Applications

Validation of optimal culture temperature for mammalian cells or microorganisms.
Germination and growth testing of seeds, bulbs, etc.; plant tissue culture, breeding experiment/research.
Developmental research or breeding of insects.
Chemical reaction experiments; quality verification of pharmaceuticals, foods, or cosmetics; and enzyme research.

Options

Outlet inside the chamber

Specifications

Model	TG-180WLED-3LE	TG-180WLED-5LE	TG-300WED-3LE	TG-300WLED-5LE
Outer dimensions [mm]	W560×D557×H1,771		W720×D638×H1,885
Inner dimensions [mm]	W390×D485×H285 ×3 shelves	Top : W390×D485×H160 Other: W390×D485×H165 ×4 shelves	Top : W496×D557×H325 Middle: W496×D557×H332 Bottom: W496×D557×H358	Bottom: W496×D557×H190 Other : W496×D557×H185 ×4 shelves
Control system	Changeover system between constant operation and day/night switching operation
Temperature range	+5～50℃（+5～25℃、+10～50℃）　During lighting： +10～40℃
Light source	WLED×3 shelves with regulator	WLED×5 shelves with regulator	WLED×3 shelves with regulator	WLED×5 shelves with regulator
Operation current (maximum)	11A	17A	16A	17A
Power requirement	Single phase 100V　 15A	Single phase 100V　50/60Hz 20A

* These incubators are designed to operate in ambient temperatures up to 30℃. The specified performance may not be achieved depending on actual usage conditions.
* Temperature can be controlled between +5 and +50℃. When lighting, temperature should be set from 10℃ to 40℃.
* If the lowest temperature is not less than 5℃ and less than 10℃, the temperature difference between shelves should be 5℃. If the lowest temperature is not less than 10℃, the temperature difference between shelves should be 5- 10℃.
* The temperature difference between adjacent shelves should be not less than 5℃ and not more than 10℃. Temperature should be set to be lower in the shelf below and to be higher in the shelf above.

Products